Paper · 2009 · Indian Journal of Agricultural Research

WATER RELATIONS AND QUALITY PARAMETERS OF SOYBEAN [GLYCINE MAX (L.) MERRILL] AS INFLUENCED BY PHOSPHORUS SOURCES, LEVELS AND AGRO-CHEMICALS

Yogesh Kanojia; D. D. Sharma

12
claims
29
verbatim quotes
1
citations
2
research areas
—
Not open access

Abstract

A field experiment was carried out during kharif seasons of 2003 and 2004. Pooled analysis of data indicated no significant influence of both phosphorus sources viz., DAP and PR (34/74) + cowdung (1:3) + PSB on water relations and quality parameters of soybean. Phosphorus levels also did not differ significantly. with RWC and proline content of leaves, however 60 kg P2O5 ha−1 recorded significantly higher oil and protein content (19.76 and 40.77 per cent, respectively) and their yields (277.33 and 570.81 kg ha−1, respectively) over 40 kg P2O5 ha−1. Amongst the agrochemicals, foliar application of brassinolide (0.25 ppm) significantly reduced proline content and increased RWC of leaves at 40 and 70 DAS. It also increased oil and protein content and their yield by 4.44 and 3.42 and 19.32 and 18.24 per cent, respectively over water spray.

Abstract from the paper’s OpenAlex record, shown for indexing and research. Copyright remains with the authors or the publisher. Read at the source ↗

The text the model read, with the source record’s inline markup (italics, sub- and superscripts) rendered and its character entities decoded; quote offsets refer to the raw text.

Claims 12

Intervention effectobservedoriginal resultno effectnot significant (as stated)measured

Claim · model-written summary

Phosphorus sources did not significantly differ for soybean water relations and quality.

Taxon
soybeanGlycine maxe0
Treatment
DAPe0
Outcome
water relations and quality parameterse0
Direction
no significant influencee0
Comparator
PR (34/74) + cowdung (1:3) + PSBe0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“Pooled analysis of data indicated no significant influence of both phosphorus sources viz., DAP and PR (34/74) + cowdung (1:3) + PSB on water relations and quality parameters of soybean.”

✓ located verbatim in the source · abstract, characters 75–261 · show in text ↑
Intervention effectobservedoriginal resultno effectnot significant (as stated)measured

Claim · model-written summary

Phosphorus levels did not significantly differ for leaf RWC and proline content.

Taxon
soybeanGlycine maxe1
Organ / stage
leavese0
Treatment
Phosphorus levelse0
Outcome
RWC and proline content of leavese0
Direction
did not differe0

Not reportedComparator

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“Phosphorus levels also did not differ significantly. with RWC and proline content of leaves”

✓ located verbatim in the source · abstract, characters 262–353 · show in text ↑
e1

“soybean”

✓ located verbatim in the source · abstract, characters 253–260 · show in text ↑
Intervention effectobservedoriginal resultpositivesignificant (as stated)measured

Claim · model-written summary

At 60 kg P2O5 ha−1, soybean oil content was significantly higher than at 40 kg P2O5 ha−1, reaching 19.76 per cent.

Taxon
soybeanGlycine maxe1
Treatment
60 kg P2O5 ha−1e0
Outcome
oile0
Direction
highere0
Value
19.76e0
Comparator
40 kg P2O5 ha−1e0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“60 kg P2O5 ha−1 recorded significantly higher oil and protein content (19.76 and 40.77 per cent, respectively) and their yields (277.33 and 570.81 kg ha−1, respectively) over 40 kg P2O5 ha−1.”

✓ located verbatim in the source · abstract, characters 363–554 · show in text ↑
e1

“soybean”

✓ located verbatim in the source · abstract, characters 253–260 · show in text ↑
Intervention effectobservedoriginal resultpositivesignificant (as stated)measured

Claim · model-written summary

At 60 kg P2O5 ha−1, soybean protein content was significantly higher than at 40 kg P2O5 ha−1, reaching 40.77 per cent.

Taxon
soybeanGlycine maxe1
Treatment
60 kg P2O5 ha−1e0
Outcome
protein contente0
Direction
highere0
Value
40.77 per cente0
Comparator
40 kg P2O5 ha−1e0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“60 kg P2O5 ha−1 recorded significantly higher oil and protein content (19.76 and 40.77 per cent, respectively) and their yields (277.33 and 570.81 kg ha−1, respectively) over 40 kg P2O5 ha−1.”

✓ located verbatim in the source · abstract, characters 363–554 · show in text ↑
e1

“soybean”

✓ located verbatim in the source · abstract, characters 253–260 · show in text ↑
Intervention effectobservedoriginal resultpositivesignificant (as stated)measured

Claim · model-written summary

At 60 kg P2O5 ha−1, soybean oil yield was higher than at 40 kg P2O5 ha−1, reaching 277.33 kg ha−1.

Taxon
soybeanGlycine maxe1
Treatment
60 kg P2O5 ha−1e0
Outcome
oile0
Direction
highere0
Value
277.33e0
Comparator
40 kg P2O5 ha−1e0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“60 kg P2O5 ha−1 recorded significantly higher oil and protein content (19.76 and 40.77 per cent, respectively) and their yields (277.33 and 570.81 kg ha−1, respectively) over 40 kg P2O5 ha−1.”

✓ located verbatim in the source · abstract, characters 363–554 · show in text ↑
e1

“soybean”

✓ located verbatim in the source · abstract, characters 253–260 · show in text ↑
Intervention effectobservedoriginal resultpositivesignificant (as stated)measured

Claim · model-written summary

At 60 kg P2O5 ha−1, soybean protein yield was higher than at 40 kg P2O5 ha−1, reaching 570.81 kg ha−1.

Taxon
soybeanGlycine maxe1
Treatment
60 kg P2O5 ha−1e0
Outcome
proteine0
Direction
highere0
Value
570.81 kg ha−1e0
Comparator
40 kg P2O5 ha−1e0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“60 kg P2O5 ha−1 recorded significantly higher oil and protein content (19.76 and 40.77 per cent, respectively) and their yields (277.33 and 570.81 kg ha−1, respectively) over 40 kg P2O5 ha−1.”

✓ located verbatim in the source · abstract, characters 363–554 · show in text ↑
e1

“soybean”

✓ located verbatim in the source · abstract, characters 253–260 · show in text ↑
Intervention effectobservedoriginal resultpositivesignificant (as stated)measured

Claim · model-written summary

Foliar brassinolide reduced leaf proline content at 40 and 70 DAS.

Taxon
soybeanGlycine maxe1
Organ / stage
leavese0
Treatment
foliar application of brassinolide (0.25 ppm)e0
Outcome
proline contente0
Direction
reducede0
Qualifier
40 and 70 DASe0
Comparator
water spraye2

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“foliar application of brassinolide (0.25 ppm) significantly reduced proline content and increased RWC of leaves at 40 and 70 DAS.”

✓ located verbatim in the source · abstract, characters 582–711 · show in text ↑
e1

“soybean”

✓ located verbatim in the source · abstract, characters 253–260 · show in text ↑
e2

“over water spray”

✓ located verbatim in the source · abstract, characters 830–846 · show in text ↑
Intervention effectobservedoriginal resultpositivesignificant (as stated)measured

Claim · model-written summary

Foliar brassinolide increased leaf RWC at 40 and 70 DAS.

Taxon
soybeanGlycine maxe1
Treatment
foliar application of brassinolide (0.25 ppm)e0
Outcome
RWC of leavese0
Direction
increasede0
Qualifier
40 and 70 DASe0
Comparator
water spraye2

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“foliar application of brassinolide (0.25 ppm) significantly reduced proline content and increased RWC of leaves at 40 and 70 DAS.”

✓ located verbatim in the source · abstract, characters 582–711 · show in text ↑
e1

“soybean”

✓ located verbatim in the source · abstract, characters 253–260 · show in text ↑
e2

“over water spray”

✓ located verbatim in the source · abstract, characters 830–846 · show in text ↑
Intervention effectobservedoriginal resultpositivemeasured

Claim · model-written summary

Brassinolide increased oil content by 4.44 per cent over water spray.

Taxon
soybeanGlycine maxe1
Treatment
brassinolidee2
Outcome
oile0
Direction
increasede0
Value
4.44e0
Comparator
water spraye0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“It also increased oil and protein content and their yield by 4.44 and 3.42 and 19.32 and 18.24 per cent, respectively over water spray.”

✓ located verbatim in the source · abstract, characters 712–847 · show in text ↑
e1

“soybean”

✓ located verbatim in the source · abstract, characters 253–260 · show in text ↑
e2

“foliar application of brassinolide (0.25 ppm)”

✓ located verbatim in the source · abstract, characters 582–627 · show in text ↑
Intervention effectobservedoriginal resultpositivemeasured

Claim · model-written summary

Brassinolide increased protein content by 3.42 per cent over water spray.

Taxon
soybeanGlycine maxe1
Treatment
brassinolidee2
Outcome
protein contente0
Direction
increasede0
Value
3.42e0
Comparator
water spraye0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“It also increased oil and protein content and their yield by 4.44 and 3.42 and 19.32 and 18.24 per cent, respectively over water spray.”

✓ located verbatim in the source · abstract, characters 712–847 · show in text ↑
e1

“soybean”

✓ located verbatim in the source · abstract, characters 253–260 · show in text ↑
e2

“foliar application of brassinolide (0.25 ppm)”

✓ located verbatim in the source · abstract, characters 582–627 · show in text ↑
Intervention effectobservedoriginal resultpositivemeasured

Claim · model-written summary

Brassinolide increased oil yield by 19.32 per cent over water spray.

Taxon
soybeanGlycine maxe1
Treatment
brassinolidee2
Outcome
oile0
Direction
increasede0
Value
19.32e0
Comparator
water spraye0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“It also increased oil and protein content and their yield by 4.44 and 3.42 and 19.32 and 18.24 per cent, respectively over water spray.”

✓ located verbatim in the source · abstract, characters 712–847 · show in text ↑
e1

“soybean”

✓ located verbatim in the source · abstract, characters 253–260 · show in text ↑
e2

“foliar application of brassinolide (0.25 ppm)”

✓ located verbatim in the source · abstract, characters 582–627 · show in text ↑
Intervention effectobservedoriginal resultpositivemeasured

Claim · model-written summary

Brassinolide increased protein yield by 18.24 per cent over water spray.

Taxon
soybeanGlycine maxe1
Treatment
brassinolidee2
Outcome
proteine0
Direction
increasede0
Value
18.24 per cente0
Comparator
water spraye0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Glycine max
Glycine max · TaxonPublic domain · Wikimedia Commons ↗

Verbatim

e0

“It also increased oil and protein content and their yield by 4.44 and 3.42 and 19.32 and 18.24 per cent, respectively over water spray.”

✓ located verbatim in the source · abstract, characters 712–847 · show in text ↑
e1

“soybean”

✓ located verbatim in the source · abstract, characters 253–260 · show in text ↑
e2

“foliar application of brassinolide (0.25 ppm)”

✓ located verbatim in the source · abstract, characters 582–627 · show in text ↑

phosphorus · quality: protein · Glycine max (soybean)Results differ

33 papers: 27 positive, 6 negative or no effect

26 papers in the same direction as this paper · 6 in the opposite direction

  1. positive
  2. no effect
  3. negative

29 papers more in this group

See all 33 papers →

phosphorus · physiology: water · Glycine max (soybean)Positive and negative results

9 papers: 6 positive, 3 negative or no effect

2 papers in the same direction as this paper · 6 in the opposite direction

  1. positive
  2. positive
  3. positive

5 papers more in this group

See all 9 papers →

application · physiology: osmolytes · Glycine max (soybean)Results agree

7 papers: 7 positive, 0 negative or no effect

6 papers in the same direction as this paper

  1. positive
  2. positive
  3. positive

3 papers more in this group

See all 7 papers →

application · physiology: water · Glycine max (soybean)Results agree

18 papers: 18 positive, 0 negative or no effect

17 papers in the same direction as this paper

  1. positive
  2. positive
  3. positive

14 papers more in this group

See all 18 papers →

Claims are grouped by organism, treatment and what was measured or targeted. A paper counts as positive when any of its claims in the group is positive.