Paper · 2024 · Forestist

Uses, Structures, and Biomass of Some Stands of Bambusa Vulgaris Schrad, ex J.C. Wendl in the Center Region of Cameroon

Jean Louis Fobane; Alain Christian Minfegue Bussard; Jules Christian Zekeng; et al.

11
claims
18
verbatim quotes
2
citations
2
research areas
✓
Open access · cc-by-nc

Abstract

Our work aims to improve the knowledge of the various ecosystem services rendered by Bambusa vulgaris, one of the non-timber forest products with high conservation value. The study was carried out in Ekali I and Ballong II, two localities in the Center Region of Cameroon. A semi-structured questionnaire on the ethnobotany of bamboo species was administered to 150 people selected in the two study localities. The clumping-based sampling design was used to collect structural data for Bambusa vulgaris. In addition, its biomass was estimated using allometric models developed using the destructive method. The survey revealed that Bambusa vulgaris is used for construction, food, handicrafts, household energy supply, and agriculture and as poles for transporting electric wires. The average culm density of Bambusa vulgaris in both localities is 4733.67 culms ha−1 with an average number of clumps of 96 ha−1 . The Ballong II locality has higher structural parameters than Ekali, with 120 clumps ha−1 , an average density of 5720 stems/ha−1 , an average diameter of 9.46 cm, and an average height of 12.61 m. The biomass of the Bambusa vulgaris stands estimated to average 24.66 ± 21.50 kg ha−1 , with a coefficient of variation of 1.19%. Because of the pressure on this species due to its uses and role in climate regulation, it is urgent to think of a robust policy for its development and conservation. Cite this article as: Fobane, J. L., Minfegue Bussard, A. C., Zekeng, J. C., Chimi, P. M., & Mbolo, M. M. (2024). Uses, structures and biomass of some stands of bambusa vulgaris schrad, ex J.C. wendl in the center region of Cameroon. Forestist, 74(1), 53-61.

Abstract from the paper’s OpenAlex record; open copy licensed cc-by-nc. Read at the source ↗

The text the model read, with the source record’s inline markup (italics, sub- and superscripts) rendered and its character entities decoded; quote offsets refer to the raw text.

Claims 11

Observationobservedoriginal resultmeasured

Claim · model-written summary

Bambusa vulgaris is used for construction, food, handicrafts, energy, agriculture and electric wire transport poles.

Taxon
Bambusa vulgarisBambusa vulgarise0
Outcome
used for construction, food, handicrafts, household energy supply, and agriculture and as poles for transporting electric wirese0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Bambusa vulgaris
Bambusa vulgaris · TaxonHans Hillewaert · CC BY-SA 3.0 · Wikimedia Commons ↗

Verbatim

e0

“Bambusa vulgaris is used for construction, food, handicrafts, household energy supply, and agriculture and as poles for transporting electric wires.”

✓ located verbatim in the source · abstract, characters 632–780 · show in text ↑
Observationobservedoriginal resultmeasured

Claim · model-written summary

Mean culm density was 4733.67 culms ha−1.

Taxon
Bambusa vulgarisBambusa vulgarise0
Outcome
average culm densitye0
Value
4733.67 culms ha−1e0
Setting
both localitiese0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Bambusa vulgaris
Bambusa vulgaris · TaxonHans Hillewaert · CC BY-SA 3.0 · Wikimedia Commons ↗

Verbatim

e0

“The average culm density of Bambusa vulgaris in both localities is 4733.67 culms ha−1 with an average number of clumps of 96 ha−1”

✓ located verbatim in the source · abstract, characters 781–910 · show in text ↑
Observationobservedoriginal resultmeasured

Claim · model-written summary

Mean clump number was 96 ha−1.

Taxon
Bambusa vulgarisBambusa vulgarise0
Outcome
number of clumpse0
Value
96 ha−1e0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Bambusa vulgaris
Bambusa vulgaris · TaxonHans Hillewaert · CC BY-SA 3.0 · Wikimedia Commons ↗

Verbatim

e0

“The average culm density of Bambusa vulgaris in both localities is 4733.67 culms ha−1 with an average number of clumps of 96 ha−1”

✓ located verbatim in the source · abstract, characters 781–910 · show in text ↑
Observationobservedoriginal resultmeasured

Claim · model-written summary

Ballong II had higher structural parameters than Ekali.

Taxon
Bambusa VulgarisBambusa vulgarist0
Outcome
structural parameterse0
Direction
highere0
Comparator
Ekalie0
Setting
Ballong IIe0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Bambusa vulgaris
Bambusa vulgaris · TaxonHans Hillewaert · CC BY-SA 3.0 · Wikimedia Commons ↗

Verbatim

e0

“The Ballong II locality has higher structural parameters than Ekali”

✓ located verbatim in the source · abstract, characters 913–980 · show in text ↑
t0

“Bambusa Vulgaris”

✓ located verbatim in the source · title, characters 48–64 · show in text ↑
Observationobservedoriginal resultmeasured

Claim · model-written summary

Ballong II had 120 clumps ha−1.

Taxon
Bambusa VulgarisBambusa vulgarist0
Outcome
clumpse0
Value
120 clumps ha−1e0
Setting
Ballong IIe0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Bambusa vulgaris
Bambusa vulgaris · TaxonHans Hillewaert · CC BY-SA 3.0 · Wikimedia Commons ↗

Verbatim

e0

“The Ballong II locality has higher structural parameters than Ekali, with 120 clumps ha−1”

✓ located verbatim in the source · abstract, characters 913–1002 · show in text ↑
t0

“Bambusa Vulgaris”

✓ located verbatim in the source · title, characters 48–64 · show in text ↑
Observationobservedoriginal resultmeasured

Claim · model-written summary

Ballong II had mean density of 5720 stems/ha−1.

Taxon
Bambusa VulgarisBambusa vulgarist0
Outcome
average densitye0
Value
5720 stems/ha−1e0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Bambusa vulgaris
Bambusa vulgaris · TaxonHans Hillewaert · CC BY-SA 3.0 · Wikimedia Commons ↗

Verbatim

e0

“an average density of 5720 stems/ha−1”

✓ located verbatim in the source · abstract, characters 1005–1042 · show in text ↑
t0

“Bambusa Vulgaris”

✓ located verbatim in the source · title, characters 48–64 · show in text ↑
Observationobservedoriginal resultmeasured

Claim · model-written summary

Ballong II had mean diameter of 9.46 cm.

Taxon
Bambusa VulgarisBambusa vulgarist0
Outcome
average diametere0
Value
9.46 cme0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Bambusa vulgaris
Bambusa vulgaris · TaxonHans Hillewaert · CC BY-SA 3.0 · Wikimedia Commons ↗

Verbatim

e0

“an average diameter of 9.46 cm”

✓ located verbatim in the source · abstract, characters 1045–1075 · show in text ↑
t0

“Bambusa Vulgaris”

✓ located verbatim in the source · title, characters 48–64 · show in text ↑
Observationobservedoriginal resultmeasured

Claim · model-written summary

Ballong II had mean height of 12.61 m.

Taxon
Bambusa VulgarisBambusa vulgarist0
Outcome
average heighte0
Value
12.61 me0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Bambusa vulgaris
Bambusa vulgaris · TaxonHans Hillewaert · CC BY-SA 3.0 · Wikimedia Commons ↗

Verbatim

e0

“an average height of 12.61 m”

✓ located verbatim in the source · abstract, characters 1081–1109 · show in text ↑
t0

“Bambusa Vulgaris”

✓ located verbatim in the source · title, characters 48–64 · show in text ↑
Observationobservedoriginal resultmeasured

Claim · model-written summary

Estimated stand biomass averaged 24.66 ± 21.50 kg ha−1.

Taxon
Bambusa vulgarisBambusa vulgarise0
Outcome
biomasse0
Value
24.66 ± 21.50 kg ha−1e0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Bambusa vulgaris
Bambusa vulgaris · TaxonHans Hillewaert · CC BY-SA 3.0 · Wikimedia Commons ↗

Verbatim

e0

“The biomass of the Bambusa vulgaris stands estimated to average 24.66 ± 21.50 kg ha−1”

✓ located verbatim in the source · abstract, characters 1111–1196 · show in text ↑
Observationobservedoriginal resultmeasured

Claim · model-written summary

Estimated biomass had a coefficient of variation of 1.19%.

Taxon
Bambusa VulgarisBambusa vulgarist0
Outcome
coefficient of variatione0
Value
1.19%e0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Bambusa vulgaris
Bambusa vulgaris · TaxonHans Hillewaert · CC BY-SA 3.0 · Wikimedia Commons ↗

Verbatim

e0

“with a coefficient of variation of 1.19%”

✓ located verbatim in the source · abstract, characters 1199–1239 · show in text ↑
t0

“Bambusa Vulgaris”

✓ located verbatim in the source · title, characters 48–64 · show in text ↑
Recommendationauthor interpretationoriginal resultbasis n/a

Claim · model-written summary

The authors urge a policy for development and conservation of Bambusa vulgaris.

Taxon
Bambusa VulgarisBambusa vulgarist0
Outcome
robust policy for its development and conservatione0

Organisms pictured · Representative pictures of the matched species, not figures from the paper.

Bambusa vulgaris
Bambusa vulgaris · TaxonHans Hillewaert · CC BY-SA 3.0 · Wikimedia Commons ↗

Verbatim

e0

“it is urgent to think of a robust policy for its development and conservation”

✓ located verbatim in the source · abstract, characters 1329–1406 · show in text ↑
t0

“Bambusa Vulgaris”

✓ located verbatim in the source · title, characters 48–64 · show in text ↑