Abstract
Relevance . The efficiency of creating high-quality renewed fiber flax seeds depends on the methods of selection of initial plants. The development of more advanced methods for selecting the source material, which makes it possible to ensure less laborious creation of the original material, which has a complex of qualitative features and properties, at the initial stages of seed production is relevant and has practical significance. Methods . The experiments were carried out in accordance with the existing methods for laying and conducting experiments with fiber flax, guidelines for the primary seed production of the crop. The varietal quality of the created seed material was evaluated by the soil control method. Results . It is established that the method of selecting plants by the total length of the stem in combination with seeding 200 pcs. germinating seeds per 1 pоg. m row, compared with the selection according to the current method, provided the highest yield of updated flax seeds (91.8 g/m 2 ), the highest uniformity in weight (82%) and density (92%) of the seed, as well as seed strength (2.9 g per 100 seedlings), the mass of 1 cm of the seedling (5.1 mg) while maintaining the required level of sowing and varietal quality of the original material. The advantage of the increased seeding rate (200 seeds/m) in the selection nursery compared to the sowing of 150 seeds with both methods of selecting the source material was revealed. In all variants of the experiment, seeds with a good level of varietal quality were formed. When conducting a production check, the advantage of the selection method for the total length of the stem was confirmed in comparison with the accepted analogue.
Abstract from the paper’s OpenAlex record; open copy licensed cc-by. Read at the source ↗
The text the model read, with the source record’s inline markup (italics, sub- and superscripts) rendered and its character entities decoded; quote offsets refer to the raw text.
Claims 9
Claim · model-written summary
Stem-length selection with dense sowing gave the highest renewed flax seed yield.
- Taxon
- flax
Linum usitatissimume0 - Treatment
- method of selecting plants by the total length of the stem in combination with seeding 200 pcs. germinating seeds per 1 pоg. m rowe0
- Outcome
- yield of updated flax seedse0
- Direction
- higheste0
- Value
- 91.8 g/m 2e0
- Comparator
- selection according to the current methode0
Organisms pictured · Representative pictures of the matched species, not figures from the paper.
Verbatim
e0“the method of selecting plants by the total length of the stem in combination with seeding 200 pcs. germinating seeds per 1 pоg. m row, compared with the selection according to the current method, provided the highest yield of updated flax seeds (91.8 g/m 2 )”
Claim · model-written summary
The method gave 82% uniformity in seed weight.
Verbatim
e0“the method of selecting plants by the total length of the stem in combination with seeding 200 pcs. germinating seeds per 1 pоg. m row, compared with the selection according to the current method, provided the highest yield of updated flax seeds (91.8 g/m 2 ), the highest uniformity in weight (82%) and density (92%) of the seed”
t0“fiber flax plants”
Claim · model-written summary
The method gave 92% uniformity in seed density.
Verbatim
e0“the method of selecting plants by the total length of the stem in combination with seeding 200 pcs. germinating seeds per 1 pоg. m row, compared with the selection according to the current method, provided the highest yield of updated flax seeds (91.8 g/m 2 ), the highest uniformity in weight (82%) and density (92%) of the seed”
t0“fiber flax plants”
Claim · model-written summary
The selected seed had seedling strength of 2.9 g per 100 seedlings.
Verbatim
e0“seed strength (2.9 g per 100 seedlings), the mass of 1 cm of the seedling (5.1 mg)”
t0“fiber flax plants”
Claim · model-written summary
The mass per centimeter of seedling was 5.1 mg.
Verbatim
e0“seed strength (2.9 g per 100 seedlings), the mass of 1 cm of the seedling (5.1 mg)”
t0“fiber flax plants”
Claim · model-written summary
The method maintained the required sowing and varietal quality.
Verbatim
e0“while maintaining the required level of sowing and varietal quality of the original material.”
t0“fiber flax plants”
Claim · model-written summary
A 200 seeds/m sowing rate was advantageous compared with 150 seeds.
Verbatim
e0“The advantage of the increased seeding rate (200 seeds/m) in the selection nursery compared to the sowing of 150 seeds with both methods of selecting the source material was revealed.”
t0“fiber flax plants”
Claim · model-written summary
All variants formed seeds with good varietal quality.
Verbatim
e0“In all variants of the experiment, seeds with a good level of varietal quality were formed.”
t0“fiber flax plants”
Claim · model-written summary
A production check confirmed the advantage of stem-length selection.
Verbatim
e0“the advantage of the selection method for the total length of the stem was confirmed in comparison with the accepted analogue.”
t0“fiber flax plants”
The same questions in other papers
stage · yield · Linum usitatissimum (flax)Positive and negative results
6 papers in the same direction as this paper · 4 in the opposite direction
- negative
- negative
- no effect
7 papers more in this group
See all 11 papers →Claims are grouped by organism, treatment and what was measured or targeted. A paper counts as positive when any of its claims in the group is positive.